On the bottom tier is the wonderful Roland Juno-106 in all its original glory. No mods, no apologies. Going against the upper tier Juno, not only are the Gravitational Slingshot chips installed but also having the Analogue Renaissance waveform chips as well. I'm auditioning the same patches as loaded on both. Are you ready for a showdown? Which one comes out on top?
These patches are available for download at GUMROAD
Audio recorded direct to iPhone via Roland GO:Mixer Pro-X via Soundcraft EPM6 Mixer. Aside from some normalization, no additional effects or processing were used.
Be sure to check out my REVERB STORE for gently owned gear and cool Eurorack modules for sale
Showing posts with label Juno-6. Show all posts
Showing posts with label Juno-6. Show all posts
Wednesday, May 6, 2026
Roland Juno-106 VS Juno-106 Gravitational Slingshot Synthesizer Comparison
Labels:
80s,
90s,
Analog,
atmosphere,
demo,
download,
electronic music,
Juno-106,
Juno-6,
Juno-60,
pads,
patches,
retro,
Roland,
sounds,
synth,
synthesizer,
vintage
Tuesday, October 7, 2025
Roland Juno-106 Synthesizer - That Juno Sound (no talking)
Today I'm auditioning some of my original patches the Roland Juno-106. I just love the 106 for those plucky arps, sweepy portamento pads, classic chorus circuit, weird resonance chops, and not forgetting those basses. The range of sounds inside the simple architecture is littered with sweet spots. I've lovingly crafted a bank of patches to harness these attributes, now these patches are available at Gumroad. Audio recorded direct to iPhone via Roland GO:Mixer Pro-X via Soundcraft EPM6 Mixer. No additional effects or processing were used.
Be sure to check out my cool pre-owned gear and hand-made eurorack modules in my Reverb Store.
Labels:
80s,
90s,
Analog,
atmosphere,
demo,
download,
electronic music,
Juno-106,
Juno-6,
Juno-60,
pads,
patches,
retro,
Roland,
sounds,
synth,
synthesizer,
vintage
Monday, February 27, 2023
JU60-VCF Eurorack Filter Adaptation Roland Juno-6/60 Jupiter-8 Now Available
JU60-VCF is an analog 4-pole low pass filter adaptation of Roland Juno-6/60 using a vintage IR3109 chip with a BA662 OTA chip in the resonance feedback loop. This topology was also used on the Jupiter-8, with a switch for tapping the 2-pole mode. Resonance will self-oscillate and produces a nice sine wave alone. JU60-VCF won’t turn your system into a polyphonic synth, but it has a classic sound at a sweet price. Time to get out your favorite stereo chorus modules and pedals!
Full details on Modular Grid
Check my Reverb store for JU60-VCF availability
Tuesday, July 12, 2022
TWO Polychrome Phasers! Stereo FTW Eurorack Effect Demo #2
Continuing phaser adventures, this time with TWO Polychrome Phasers.
Having two phasers opens a new world of stereo possibilities.
Using 2 phasers is not unlike a Mutron Bi-phase dual phaser.
A 4HP analog circuit adaptation of the 6-stage phaser section from the Italian stallion - Farfisa Polychrome.
Recorded direct, no other mastering or effects.
0:00 | Intro and patch explanation
0:53 | VCO: Pittsburgh Primary Oscillator
1:28 | VCO: DNA Symbiotic Waves
2:37 | Yamaha SK20
3:44 | Juno-60
Check my Reverb store for availability and other cool modules
Tuesday, April 30, 2019
Roland Juno-106 w/ Gravitational Slingshot Chips Overview + Demo
Today I got a special package from Syntaur, the USA distributor of Analogue Renaissance products. It's a set of six 80017A-GS VCF/VCA replacement upgrade chips for the Roland Juno-106 synthesizer. What's involved to install them? How do they sound? I'll demonstrate - but you be the judge!
0:00 Talking
- What are the Gravitational Slingshots?
- What I did to prepare for installation.
- A word on testing/calibration: it's absolutely required
- A minor caveat about my particular synth.
4:17 Audio Demos
- Listen to this w/ some nice headphones.
Audio recorded direct to Tascam DR-05
No additional effects.
Labels:
80017A,
Analog,
demo,
fix,
Juno-106,
Juno-6,
Juno-60,
Korg,
Moog,
repair,
Roland,
Sequential Circuits,
synth,
synthesizer,
upgrade,
voice chips
Tuesday, March 5, 2019
Feedback 106 Chorus Demo DIY SMD Version X-Vive Eurorack
Here it is. My fully assembled 106 Chorus by Feedback electronics.
I am not affiliated w/ Feedback or this project.
Just here to give a demo.
And to give some 'feedback' from my build of the surface mount version.
How difficult is the SMD version to build from a bare circuit board?
What are some pitfalls on this build?
How does it sound with the re-issue X-Vive chips?
0:00 Opening - Demo w/ Pittsburgh Synth Box PWM
0:30 Talking - MN3009 BBD Chips and X-Vive Re-issues
1:17 Demo w/ M-Audio Venom Polysynth Sawtooth Patch
1:34 More Talking - Building the SMD version
Demos...
2:57 Pittsburgh Synthesizer Box - Square, Saw, Tri
4:24 Synthesis Technology E352 - Wavetable
5:10 Future Retro Transient
5:34 Arturia Drumbrute Impact
6:34 Mutable Instruments Rings
7:50 Venom Polysynth "Super Juvee" Patch
Recorded direct to Tascam DR-05.
No other effects.
Subscribe to:
Posts (Atom)