Showing posts with label distortion. Show all posts
Showing posts with label distortion. Show all posts
Tuesday, July 1, 2025
JHS Colour Box v2 Lovely Saturation [FX w/ Synthesizers #19] Demo
Today I am exploring various synth and percussion elements through the JHS Colour Box v2 for that lovely vintage console saturation. A/B comparison effect on/bypass except the last section, got lost in the moment on that one. Tried my best to mind the levels, but now and then the volume is a bit inconsistent. Some normalization applied to remedy some of that, you understand. The EQ applied some nice touches, really helps pick out some sweet spots here and there. Recorded direct on iPhone via EPM6 mixer via Go:Mixer:Pro-X.
0:00 Novation Bass Station II
0:44 Bass Station II
1:22 Bass Station II
2:01 Oberheim DX
3:10 Behringer 2600
3:45 Eurorack 208HP Percussion System
5:15 Pittsburgh Modular Taiga
6:06 Roland JX-3P via Big Sky on Hall reverb
Be sure to check out my cool Eurorack modules and gently pre-owned gear in my Reverb Store
Labels:
Analog,
Colour Box,
Console,
demo,
distortion,
drum machine,
JHS,
Lofi,
Neve,
noise,
overdrive,
retro,
saturation,
Soundcraft,
SSL,
synth,
synthesizer,
tape
Monday, October 3, 2022
104HP Eurorack Case Build From Cigar Boxes Timelapse
/
Today a timelapse build: a 104HP Eurorack case from cigar boxes. These are nice Spanish cedar cabinets, not cardboard. First I build a suitable box, install rack rails. Then solder together a bus board and install power supply. Last, putting all the modules inside.
Power Supply | Tiptop uZeus
Bus Board | Synthrotek Noise Filtering Distro
Rails + Nut Strip | Synthrotek 3mm
Screws | After Later 3mm
This video was made for general entertainment purposes only. Activities in this video are not recommended without proper training and safety. If you are using woodworking power tools: always observe safety precautions, wear protective eyewear, and read user manuals to prevent accidental bodily injury.
The audio in this video used these modules:
G-Storm Electro: 101-VCO, 101-VCF, 4027 VCO, T2K-VCF, diy buffered multiple, 2xADSR, 2xVCA, Polychrome Phaser
4ms Rotating Clock Divider
Synthrotek DLY
Qu-Bit Data Bender
Feedback Modules CP3- Mixer
Pittsburgh Modular Outs
along w/ Behringer RD-8, snare has Empress Reverb
Recorded direct, no other mastering or effects.
Today a timelapse build: a 104HP Eurorack case from cigar boxes. These are nice Spanish cedar cabinets, not cardboard. First I build a suitable box, install rack rails. Then solder together a bus board and install power supply. Last, putting all the modules inside.
Power Supply | Tiptop uZeus
Bus Board | Synthrotek Noise Filtering Distro
Rails + Nut Strip | Synthrotek 3mm
Screws | After Later 3mm
This video was made for general entertainment purposes only. Activities in this video are not recommended without proper training and safety. If you are using woodworking power tools: always observe safety precautions, wear protective eyewear, and read user manuals to prevent accidental bodily injury.
The audio in this video used these modules:
G-Storm Electro: 101-VCO, 101-VCF, 4027 VCO, T2K-VCF, diy buffered multiple, 2xADSR, 2xVCA, Polychrome Phaser
4ms Rotating Clock Divider
Synthrotek DLY
Qu-Bit Data Bender
Feedback Modules CP3- Mixer
Pittsburgh Modular Outs
along w/ Behringer RD-8, snare has Empress Reverb
Recorded direct, no other mastering or effects.
Labels:
assemble,
audio,
build,
case,
delay,
demo,
distortion,
DIY,
effects,
electronic,
eurorack,
modular,
module,
music,
noise,
rack,
skiff,
synthesizers,
Synths,
woodworking
Tuesday, December 7, 2021
Sketchy Labs Freak Shift Eurorack Module [Demo #1]
Today I am auditioning the Sketchy Labs Freak Shift module.
The design is specially derived from the Bode Frequency Shifter.
There are literally sweet spots at every turn of the pots on this one.
In this video I'll briefly discuss this module and patch up some wierd sounds.
The focus is on demonstrating a range of evolving sounds of the frequency shifter.
I'll endeavor to make something more musical using the Freak Shift in a future video.
This video is not sponsored or endorsed by the Doc Sketchy.
0:00 Intro and brief discussion of patching
0:54 LFO as Mod input for phaser type sounds
1:24 Using 2 LFOs for Sine/Cosine modulation
2:55 VCO as Mod input for Frequency Shift sounds
4:48 Sum/Diff outputs for Stereo Spread
8:48 LFO modulating the AUX
Audio VCO | Pittsburgh Primary Oscillator
Modulation VCO | Cre8audio Capt'n Big-O
LFO Modulation | XAOC Batumi
Recorded direct to Tascam DR-05.
No additional effects or processing used.
Tuesday, March 23, 2021
Pittsburgh Modular Crow [Safari] First Patches Eurorack Filter [Demo #1]
Just got a couple of new Pittsburgh Modular Safari Crow filters in.
Running them through some percussion patches, sounds nice :D
Part I 0:00
Dropped the first Crow into my 2-row percussion rack.
The first demo showing it being used in classic Nicol fashion...
Crow is used in highpass mode on the Feedback Static noise source for high-hat duty.
Hats: Static | Crow HP | Bastl Skis II | Pittsburgh Analog Delay Unit
Kick: Pittsburgh Synth Box LPF self res
Snareish thing: Basimilus | Local Florist
Misc Percussion: Gibbon CV | FR Transient (Sequenced by Varigate 4) | DC571
A pair of Feedback Squeeze compressors strapped on the outputs.
Digitakt sequenced via Erica Midi To Trigger
Part II 3:26
2nd Crow went into the 3-row synth rack.
All sound: G-Storm Transistor-82 | Crow LP
Pitch mod: Pittsburgh Primary Osc B
Noise Type mod: Batumi
Osc/Noise mod: Pittsburgh Toolbox S/H
Crow mod: G-Storm 2xADSR
FX: Timefactor and Big Sky Room setting
Sequenced by Keystep Pro
Labels:
Analog,
Analog Delay Unit,
Crow,
distortion,
eurorack,
filter,
Gibbon,
highpass,
Local Florist,
lowpass,
modular,
module,
noise,
overdrive,
percussion,
Pittsburgh Modular,
Safari,
synthesizers,
Synths
Tuesday, November 12, 2019
Behringer Neutron First Patch [Demo #1]
Today a first patch soundscape/sequence on my new muse,
the Behringer Neutron. Listen that on headphones. No, really.
I haven't come across any compelling demos on the Neutron.
It has great specs, but not much attention was given.
Until I had a chance to play one last weekend at the Dallas Synth Meet.
HOLY SHNITZEL. This thing blew me away.
The analog BBD delay section is one of the nicest.
So responsive, expressive,
...and lovely thick feedback harmonics.
You can ride the feedback right up to pure chaos, then
back away. It will abide your every move.
And every time I tweaked something it got better and better.
I am really looking forward to getting more cutting edge
sound design with this one!
Sequencing: Beatstep Pro
Recorded Direct to Tascam DR-05.
Additional delay using Timefactor Delay.
Labels:
Ambient,
Analog,
BBD,
Behringer,
cutting edge,
delay,
demo,
distortion,
feedback,
sound design,
soundscape,
synth,
synthesizer
Tuesday, May 14, 2019
GSE 4023-VCF Demo #2 Lovely Saturation
Darkwave, deep house, tribal and Carpenter-esque sounds ahead.
Of the filters I'm offering, 4023-VCF has the most lovely saturation to me.
In most cases, when the input slider is above 60% the filter input will start to become overdriven.
Resulting in a warm and fuzzy distortion.
Audio recorded direct to Tascam DR-05.
Some use of the Timefactor Delay and Big Sky Reverb.
0:00 Opening
0:14 Talking
1:01 Audio demos w/ talking intros
Kick Drum - Future Retro Transient+
Oscillators - Pittsburgh Synth Box + Rozendall CEM3340
Envelope Contours - 2xADSR dual envelope
Ring Mod - Mutable Warps
LFO - Batumi
MIDI Sequence - Beatstep Pro
Labels:
Analog,
ARP,
bass,
distortion,
eurorack,
filter,
MK1,
modular,
Moog,
Odyssey,
overdrive,
retro,
ring mod,
Roland,
saturation,
synthesizer,
VCF
Tuesday, December 11, 2018
Pittsburgh Modular DNA Symbiotic Waves More Tips-N-Tricks [Demo 3]
Once again we are looking at the DNA Symbiotic Waves dual oscillator: a cornucopia of naked digital synthesis anarchy. Today I will drill down on some more tips for edgy and gritty sounds.
Topics
Supersaw! + Detuned Oscillators - Layer Processor
Trying Other Processors with these settings
Small Processing Amounts
Using DNA with a Filter Module
Oscillator #2 Tuning
Modulating Oscillator Mix Balance
The Bizarre FM Delay Processor
Maxxing Out Processor Amounts - FM Reduce
Setting the Mix fully to One Oscillator
Reduce Processor
Switch Processor - Dubstep Wobble
Recorded Direct to Tascam DR-05, no effects.
VCA - Bastl Skis
LFO - Pittsburgh Synthesizer Box
Filter - my SH2-VCF
Note Triggering - Arturia Beatstep Pro
Labels:
chaos,
Cloud Terrarium,
digital,
distortion,
DNA Symbiotic Waves,
euro,
eurorack,
Graphic VCO,
how to,
module,
noise,
oscillator,
Pittsburgh Modular,
sound design,
Synthesis Technology,
synthesizer
Wednesday, September 21, 2016
Roland RE-20 Space Echo Audio Demo w/ Synthesizers #6
This is my follow-up video demo of the Roland Boss Space Echo RE-20 pedal. Previously I talked at length about what the functions do. This time I give more audio examples w/ various synthesizers, lead sounds, bass, arpeggios, and a drum machine. Included here are Roland System-1, TR-606, and XP-30. As well as an ARP Solina String Ensemble, and a Korg 770. Audio recorded direct from mixer into a Tascam DR-05 recorder, no other effects processing other than the RE-20.
Labels:
ARP,
arpeggio,
bass,
Boss,
delay,
demo,
distortion,
drum machine,
Korg,
lead,
pedal,
Pink Floyd,
Radiohead,
RE-20,
Roland,
Solina,
Space Echo,
synthesizer,
System-1,
TR-606
Subscribe to:
Posts (Atom)