/
Today a timelapse build: a 104HP Eurorack case from cigar boxes. These are nice Spanish cedar cabinets, not cardboard. First I build a suitable box, install rack rails. Then solder together a bus board and install power supply. Last, putting all the modules inside.
Power Supply | Tiptop uZeus
Bus Board | Synthrotek Noise Filtering Distro
Rails + Nut Strip | Synthrotek 3mm
Screws | After Later 3mm
This video was made for general entertainment purposes only. Activities in this video are not recommended without proper training and safety. If you are using woodworking power tools: always observe safety precautions, wear protective eyewear, and read user manuals to prevent accidental bodily injury.
The audio in this video used these modules:
G-Storm Electro: 101-VCO, 101-VCF, 4027 VCO, T2K-VCF, diy buffered multiple, 2xADSR, 2xVCA, Polychrome Phaser
4ms Rotating Clock Divider
Synthrotek DLY
Qu-Bit Data Bender
Feedback Modules CP3- Mixer
Pittsburgh Modular Outs
along w/ Behringer RD-8, snare has Empress Reverb
Recorded direct, no other mastering or effects.
Showing posts with label music. Show all posts
Showing posts with label music. Show all posts
Monday, October 3, 2022
104HP Eurorack Case Build From Cigar Boxes Timelapse
Labels:
assemble,
audio,
build,
case,
delay,
demo,
distortion,
DIY,
effects,
electronic,
eurorack,
modular,
module,
music,
noise,
rack,
skiff,
synthesizers,
Synths,
woodworking
Tuesday, February 23, 2021
G-Storm Electro 3x Delta VCF Eurorack Filter [Demo #4]
My Delta VCF is now available in black panel.
To commemorate the occasion I made a little demo using three of them.
Delta VCF is a eurorack adaptation of the Korg Poly-61 + Delta synthesizer filter.
Check my Reverb store for module availability
Bass
Pittsburgh Primary Osc | Delta VCF #1 | Timefactor
Arpeggio
GSE 101-VCO | Delta VCF #2| FX Aid Delay
Lead
2x 4027 VCO | Delta VCF #3 | FX Aid Reverb
LFOs | Batumi
Percussion | Digitakt
Mixed on Mackie 802VLZ, recorded straight to Tascam DR-05.
No additional mastering fx or eq.
Labels:
adaptation,
arpeggio,
bass,
Delta,
Digitakt,
electronic,
eurorack,
filter,
Happy Nerding,
Korg,
modular,
music,
new gear,
Pittsburgh Modular,
Poly-61,
synth,
synthesizer,
VCF
Friday, June 9, 2017
Eurorack Synthesizer Jam Mutable Rings + Roland TR-606 [Fracture]
In this video I jam on the Eurorack, a bit of chill electro house.
Arpeggios: Mutable Instruments Rings to JP-6 Filter BP Mode + Timefactor delay
Drums: Roland TR-606 + small amount of Big Sky Room reverb
Bass: Pittsburgh Modular Synthesizer Box
Sequencer: Arturia Beatstep Pro
Mixer: Mackie 802-VLZ3
Recorded direct to Tascam DR-05
Labels:
Arturia,
Beatstep Pro,
Big Sky,
chill,
electro,
electronic,
eurorack,
house,
jam,
modular,
music,
Mutable Instruments,
Pittsburgh Modular,
Rings,
Roland,
Sequencer,
synthesizer,
Synthesizer Box,
Timefactor,
TR-606
Subscribe to:
Comments (Atom)